How to install "Add-on" VIBE NS-349S

Please refer - http://forums.anandtech.com/showthread.php?t=286782

download all add-on in http://www.internetteam.de/zaphod/download/firmware/FSC/

Use the login credentials "amsadmin" and "ams150" for the pass. Don't worry, you're not breaking in - lochness has this info posted on the FSC forums in his sig. Once there, you'll want to traverse down the NExt folder to /NExt/Base/LCS-8311. We need to install the Base extensions before we can install anything else. Each download will have a corresponding README - if you want to know more... READ THEM!


NExt-> addons_ntx_liba

Rename each file simply by adding --ntx_libra at the end of the filename before the .tgz . There's no need to explain why, aside from the fact that the extension loader looks for the filename ntx_libra.tgz starting from the end of the file name. After you've renamed both, go ahead and load each extension, order doesn't really matter I don't think. Once each one loads, reboots and reloads, give the NAS one more reboot for good measure.

I am first to install "add-on" is "NExtFW - base version: 2.10.04 for NS-349S ". Because all "add-on" need to installation this packet.

At this point, download the latest NEXT_base_LCS-8311 version. Again, I'm not hotlinking, because this can change anytime. The appropriate file will have the version number followed by --ntx_libra.tgz. Download it, and cuddle it for a bit. Not too long though, because you're going to want to load these extensions into your NAS! You should know how to do this if you've gotten this far. Let it rip, wait for the load to complete (about 2 minutes), then log into your NAS again.

Next, installation "telnetd version: 1.02 for AMS and SBLAN2"
I have used "PuTTYPortable" to connection NAS. Important to change "root" password.
By default login - amsadmin, Password:ams150
command : passwd

Installation "webadmin" is very useful tool.

PREREQUISITES:
--------------
- NExt base 1.0.03 / 2.0.03 or newer
- NEXT_php 5.2.6B1 or newer
- NEXT_mysql if administering packages with mysql interface

At this point, you should be able to open a browser and enter the following URL:

http://:81/phpwebif/index.php

Obviously... change to whatever your actual NAS name or IP address is. You will be greeted by a slick little login prompt - log in with your NAS admin/root username and password, and welcome to the NExt Webadmin UI! From this page, you can manage any additional Addons you install using the same method as above (download/rename/load extension). They work pretty much the same as services do in Windows on this page. If the Addon has it's own interface (Like CUPS for example), there will be a link labeled Interface next to the Readme, which will take you directly to that module's interface.




I have installed mldonkey version: 3.0.2 for AMS and SBLAN2

將圖片批次加入浮水印的工具

TSR Watermark Image Software


找到了這個批次加入浮水印的工具：TSR Watermark Image Software 1.6.9.2，只要把來源資料夾與輸出資料夾指定好，再輸入浮水印文字或圖片後，印下〔Start〕就能產生加了浮水印的圖片檔。

TSR Watermark Image Software資訊
•官方網站：http://www.watermark-image.com/default.aspx
•直接下載1.6.9.2版：http://www.watermark-image.com/watermark-image.zip (需要.NET環境)
•授權方法：商用必須付費，個人使用免費

Shardana Antivirus Rescue Disk Utility

Shardana Antivirus Rescue Disk Utility
http://www.sarducd.it/

Shardana Antivirus Rescue Disk Utility (Sardu) is software that can produce an ISO or an IMA anti-virus bootable CD, a comprehensive collections of utilities, the most popular distributions of Linux Lite, and the best known Windows PE. It is freeware (it is licensed as an individual ISO / IMA).
Once the files are extracted Sardu creates a CD / DVD or USB bootable device with a handy menu divided into four categories: Antivirus, Utilities, Linux, and PE.

How to upgrade VIBE NS-349S firmware 2.22

Original Thread http://forums.anandtech.com/showthread.php?t=286782

Download firmware -
http://manual.longshine.de/products/NAS/8311/Version2.22/

And then,
the step I took was to flash my NS-349S with the Longshine firmware. But... it's not that simple. You try to upload the firmware and the NS-349S's web interface gives you the finger, asking you to use the correct file. A little JavaScript-fu told me that it's looking for a filename with the extension of .web. Well, if you bothered to extract the firmware from the RAR file (RAR is extremely popular in Germany mind you), you'd notice it is a .web file. What could be wrong? Bad file data? Nope. It's also checking the front end of the file name to see if it's NH231_AC - the AC standing for A-Tec Corporation. HAH! Rename the the file from NH231_LONGSHINE_V2.22_3-11-2009_.web to NH231_AC_V2.22_3-11-2009_.web, and assuming your browser isn't being a PITA, in 3 minutes your NAS should upload, flash and reboot itself. Assuming all goes well, you should be able to log in (all the original settings/logins should be the same as before you flashed it), and you'll be greeted by a bright red Longshine LCS-8311 web interface, which incidentally is exactly the same as the A-Tec interface aside from minor cosmetic differences... and the addition of the eSATA button.